Model: HNAG1000-O2
Detection: O2
Detection Principle: Electrochemistry
Detection range: O2 0-1000ppm
The HNAG1000-O2-Z online pump-suction O2 gas concentration detector is specifically engineered for continuous, real-time monitoring of trace oxygen levels (0-1000ppm) in closed pipelines, reaction vessels, and hazardous industrial zones. Utilizing a high-precision electrochemical sensor and advanced microcontroller technology, it delivers rapid response times (T90<10S), 1ppm resolution, and ±2%F.S measurement accuracy.

Unlike passive diffusion monitors, this pump-suction oxygen analyzer actively draws gas samples from negative-pressure or hard-to-reach pipelines for immediate analysis. Encased in a heavy-duty cast aluminum alloy housing with an IP66 waterproof/dustproof rating and Ex d IIC T6 explosion-proof certification, it withstands harsh outdoor rain, static surges, and extreme industrial conditions.


This fixed O2 gas monitor integrates seamlessly into existing PLC, DCS, DDC, and industrial alarm control hosts.
Standard Wired Outputs: Simultaneous 12-bit precision 4-20mA current signal and RS485 digital output (MODBUS RTU protocol) supporting up to 1km transmission, plus 1 set of passive relay switching contacts (220VAC 3A / 24VDC 3A) to directly trigger solenoid valves or exhaust fans.
Wireless IoT Expansion: Supports optional 4G/5G, WiFi, Bluetooth, LoRa, and ZigBee modules to upload real-time oxygen data to cloud platforms and mobile apps without distance limits.


Equipped with a 2.5-inch high-definition color screen, operators can clearly read real-time O2 concentration, ambient temperature, and humidity. The standard infrared remote controller allows engineers to perform zero-point calibration, alarm threshold adjustments, and menu navigation safely without opening the flameproof cover in explosive atmospheres.

Supporting wall-mounted, pipe, ceiling, and bracket installations, the HNAG1000-O2 is widely deployed across petrochemical plants, steel smelting, pharmaceutical workshops, and nitrogen-blanketing process controls.

Q1: Why choose a pump-suction O2 detector over a diffusion type for 0-1000ppm monitoring?
A1: Trace oxygen (0-1000ppm) monitoring is typically required inside sealed pipelines, glove boxes, or nitrogen-purged reactors where gas does not circulate naturally. The built-in pump actively draws the sample gas into the sensor chamber, ensuring fast response times (T90<10S) and preventing ambient air interference.
Q2: Can this fixed oxygen detector operate in high-temperature or high-humidity gas streams?
A2: The standard operating environment is -20℃ to 50℃ and 0-95%RH (non-condensing). For hot, wet, or dusty flue/process gases, we offer customized pretreatment systems (dehumidification, cooling, and dust filtration) as optional accessories to protect the electrochemical sensor.
Q3: What are the wiring requirements for long-distance 4-20mA or RS485 transmission?
A3: Use a three-core shielded cable for 4-20mA output and a four-core shielded cable for RS485 communication. Both signals reliably transmit up to 1 kilometer; if the distance exceeds 1,000 meters, a single wire diameter of ≥1.5mm² with a properly grounded shielding layer is required.
Q4: How is calibration performed in explosion-proof zones?
A4: The detector features automatic zero-point tracking and temperature compensation to minimize drift. When periodic multi-level calibration is needed, technicians can use the included infrared remote controller to adjust settings without opening the enclosure cover.
Q5: What is the effective sampling distance of the pump-suction system?
A5: Depending on your site configuration, optional external sampling pumps (24VDC or 220VAC) support sampling distances of up to 10 meters, while high-power vacuum pumps can draw sample gas from distances exceeding 40 meters.
Q6: Can this fixed O2 detector directly control external safety equipment like solenoid valves or fans?
A6: Yes. The unit is equipped with 1 standard set of passive relay switching contacts (capacity 220VAC 3A / 24VDC 3A) that can directly drive solenoid valves, exhaust fans, and external alarms, or control high-power equipment via intermediate relays.
Q7: What is the working pressure range for this pump-suction oxygen monitor?
A7: The instrument operates stably under standard atmospheric working pressures ranging from 86kPa to 106kPa (or 1 to 2 psi system pressure). For high-pressure pipelines, an optional pressure-reducing valve and flow meter are recommended.
Q8: What is the expected service life of the electrochemical trace oxygen sensor?
A8: Under normal operating conditions, the sensor service life is 3 to 5 years. The product also comes backed by a standard 1-year manufacturer warranty.
Q9: What are the physical dimensions, weight, and mounting options for this unit?
A9: The detector measures 220×205×97mm (L×W×H) and weighs 1.5kg. Its rugged cast aluminum alloy housing supports wall-mounted, pipe, ceiling, and bracket installations to fit various site layouts.
Q10: Can I view real-time oxygen data and historical logs on a computer or mobile phone?
A10: Yes. You can connect the detector to a PC via a USB-to-RS485 converter using our free host computer software, or add optional GPRS/4G modules to upload real-time data and historical records to a cloud platform accessible via mobile phones and computers.

The HNAG800-CLO2 Preprocessing Online Monitoring System delivers real-time Chlorine Dioxide detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for strict industrial safety.

The HNAG800-CL2 Preprocessing Online Monitoring System delivers real-time Chlorine gas detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for strict industrial safety.

The HNAG800-HF Preprocessing Online Monitoring System delivers real-time Hydrogen Fluoride detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for robust industrial safety.

The HNAG800-F2 Preprocessing Online Monitoring System provides real-time Fluorine detection. Featuring a precise electrochemical sensor within a robust stainless steel enclosure, it ensures rapid response and high safety in harsh environments.

The HNAG800-HBR/HCL Preprocessing Online Monitoring System provides real-time Hydrogen Bromide and Hydrogen Chloride detection. Featuring a precise electrochemical sensor in a stainless steel enclosure, it ensures rapid response and industrial safety.

The HNAG800-HCN Preprocessing Online Monitoring System delivers real-time Hydrogen Cyanide detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response, high accuracy, and explosion-proof safety within a rugged stainless steel enclosure.

The HNAG800-NO Preprocessing Online Monitoring System delivers real-time Nitric Oxide detection. Featuring an advanced electrochemical sensor for atmospheric monitoring, it ensures rapid response and high precision in a rugged stainless steel enclosure.

The HNAG1000-EX split-type fixed combustible gas detector monitors EX gases (0-100%LEL) in hazardous zones. Featuring a catalytic combustion sensor, remote probe, aluminum alloy housing, and 4-20mA/RS485 outputs, it ensures industrial safety.

The HNAG1000-O2 fixed pump-suction O2 gas detector monitors trace oxygen (0-1000ppm). Built with an aluminum alloy housing, electrochemical sensor, IP66/Ex d IIC T6 ratings, and 4-20mA/RS485 outputs, it ensures continuous industrial safety.

The HNAG1000-NH3 fixed NH3 gas detector offers real-time ammonia monitoring (0-100PPM). Featuring electrochemical sensor, explosion-proof aluminum housing, and 4-20mA/RS485 outputs.

The HNAG1000-CO fixed CO gas detector ensures real-time carbon monoxide monitoring. Featuring an electrochemical sensor, explosion-proof design, and 4-20mA/RS485 outputs, it guarantees safety in industrial plants.

The HNAG900 VOC gas detector offers precise real-time monitoring of volatile organic compounds. Powered by electrochemical/PID sensors and adjustable pump suction, it features a 3.5-inch TFT screen, USB export, and Ex ib II CT4 Gb rating.

The fixed C2H4O gas detector (HNAG1000) provides real-time, accurate ethylene oxide monitoring (0-100 ppm). Featuring a precise electrochemical sensor, robust aluminum alloy housing, and IP66 protection, it ensures ultimate industrial safety.

Portable HNAG920 H2SO4 Gas Detector offers dual pump-suction and diffusion sampling. With a precision electrochemical sensor, 2.0-inch LCD, and durable PC+TPU housing, it ensures rapid, accurate sulfuric acid monitoring for safety.

The HNAG920-3H portable 3-in-1 gas detector monitors CH4, C3H8, and H2. Featuring integrated pump-suction and diffusion modes, a 180° auto-rotating screen, and wireless transmission, it provides superior safety in complex environments.

The HNAG1000-O3 fixed gas detector provides real-time, highly accurate ozone (O3) monitoring. Featuring an advanced electrochemical sensor, Ex d IIC T6 rating, and 4-20mA/RS485 outputs, it ensures maximum safety in demanding industrial environments.

The HNAG920-PH3 portable gas detector offers precise real-time phosphine monitoring. Featuring a dual pump-suction and diffusion design, 2.0-inch auto-rotating screen, and wireless data export, it ensures maximum safety in hazardous environments.

The HNAG1000-H2S is an industrial fixed hydrogen sulfide (H2S) gas detector featuring a rugged stainless steel enclosure. Equipped with a precise electrochemical sensor, it delivers real-time monitoring, multi-signal output, and IP66 protection.

The HNAG920-5H portable 5-in-1 gas detector supports both pump suction and diffusion modes. It monitors O2, H2S, CO2, CO, and N2 simultaneously with high accuracy, featuring wireless transmission, a 180° auto-rotating screen, and a durable PC+TPU housing.

The HNAG800-O3 Preprocessing Online Monitoring System provides real-time Ozone detection. Featuring an advanced electrochemical sensor in a stainless steel enclosure, it ensures rapid response and high precision for strict industrial safety.

The HNAG800-CLO2 Preprocessing Online Monitoring System delivers real-time Chlorine Dioxide detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for strict industrial safety.

The HNAG800-CL2 Preprocessing Online Monitoring System delivers real-time Chlorine gas detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for strict industrial safety.

The HNAG800-HF Preprocessing Online Monitoring System delivers real-time Hydrogen Fluoride detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response and high accuracy within a rugged stainless steel enclosure for robust industrial safety.

The HNAG800-F2 Preprocessing Online Monitoring System provides real-time Fluorine detection. Featuring a precise electrochemical sensor within a robust stainless steel enclosure, it ensures rapid response and high safety in harsh environments.

The HNAG800-HBR/HCL Preprocessing Online Monitoring System provides real-time Hydrogen Bromide and Hydrogen Chloride detection. Featuring a precise electrochemical sensor in a stainless steel enclosure, it ensures rapid response and industrial safety.

The HNAG800-HCN Preprocessing Online Monitoring System delivers real-time Hydrogen Cyanide detection. Featuring a highly sensitive electrochemical sensor, it ensures rapid response, high accuracy, and explosion-proof safety within a rugged stainless steel enclosure.

The HNAG800-NO Preprocessing Online Monitoring System delivers real-time Nitric Oxide detection. Featuring an advanced electrochemical sensor for atmospheric monitoring, it ensures rapid response and high precision in a rugged stainless steel enclosure.

The HNAG1000-EX split-type fixed combustible gas detector monitors EX gases (0-100%LEL) in hazardous zones. Featuring a catalytic combustion sensor, remote probe, aluminum alloy housing, and 4-20mA/RS485 outputs, it ensures industrial safety.

The HNAG1000-O2 fixed pump-suction O2 gas detector monitors trace oxygen (0-1000ppm). Built with an aluminum alloy housing, electrochemical sensor, IP66/Ex d IIC T6 ratings, and 4-20mA/RS485 outputs, it ensures continuous industrial safety.

The HNAG1000-NH3 fixed NH3 gas detector offers real-time ammonia monitoring (0-100PPM). Featuring electrochemical sensor, explosion-proof aluminum housing, and 4-20mA/RS485 outputs.

The HNAG1000-CO fixed CO gas detector ensures real-time carbon monoxide monitoring. Featuring an electrochemical sensor, explosion-proof design, and 4-20mA/RS485 outputs, it guarantees safety in industrial plants.

The HNAG900 VOC gas detector offers precise real-time monitoring of volatile organic compounds. Powered by electrochemical/PID sensors and adjustable pump suction, it features a 3.5-inch TFT screen, USB export, and Ex ib II CT4 Gb rating.

The fixed C2H4O gas detector (HNAG1000) provides real-time, accurate ethylene oxide monitoring (0-100 ppm). Featuring a precise electrochemical sensor, robust aluminum alloy housing, and IP66 protection, it ensures ultimate industrial safety.

Portable HNAG920 H2SO4 Gas Detector offers dual pump-suction and diffusion sampling. With a precision electrochemical sensor, 2.0-inch LCD, and durable PC+TPU housing, it ensures rapid, accurate sulfuric acid monitoring for safety.